ZD-407 60W 220V Pencil Soldering Iron

Product Features: Uses; 20W, 30W, and 40W models: Radio controls, hobbies and crafts, small electrical components. 60W: Electrical household appliances, capacitors, etc. Instructions for use; 1. Clean any dirt, rust, or paint from the part you will be soldering. 2. Heat the part with the soldering iron. 3. Place resin-core solder on the part and melt it with the soldering iron. Note: If the solder you are using is not resin-core, apply a soldering paste to the part before applying the solder. 4. Wait until the solder cools and hardens, and do not move the soldered part. Caution; 1. Be very careful when the soldering iron is hot, otherwise the hot iron can cause fires or painful burns. 2. When you use the soldering iron for the first time, a light smoke may come out as the heating element dries. This is normal, but it should not last longer than approximately 10 minutes. 3. Never file a specially coated soldering iron tip. Warning: Never open the device while it is plugged in. Otherwise, there is a risk of electric shock.

• Code: ZD-407
• 60 Watt
• 220-240Vac
• 50Hz